Hi all, Need some help. I'm trying to tidy up the engine bay with my build and want to get rid of the hideous solution VW came up with when building the right hand drive cars, namely the bar linkage to the servo and the servo itself, read a lot about the HRP pedal box and these things are all over the place http://www.motorsport-tools.com/vw-...-bias-pedal-box-wilwood-master-cylinders.html They call it a pedal box but I'm unclear, is this fitted; A) in place of the servo in the engine bay B) on the right hand side in the bay with the original linkage across to the servo removed and connected through the bulkhead to the existing pedals C) fitted in the car directly to the existing pedal box Re HRP this I better understand, is it a case of call these guys as I can't seem to find a web site?? To be clear the brake bias thing is not an essential part of what I'm trying to achieve here it's to tidy the bay so if there are other solutions out there any info welcome! Thanks in advance J