Having seen something similar on the Corrado forum that I browse quite a bit, I thought it's worth creating a thread of all the people who have VAG-COM (or now known as VCDS) who are happy for help someone read fault codes and whatever out of their car. So I'll start. I have VCDS-Lite, fully functional with a paid licence. I don't *yet* have a commercially-bought lead (I will get one), but I have built my own interface and successfully used it to talk to our Corrado 16V's KE-Jet ECU which I know few seem to have success doing. I'm near Wantage, Oxfordshire.
I have VAG-COM and are in ze West London area. Getting a new laptop screen within the week so I'll be fully functional to help out if anyone needs it.
I have a full VAG-COM cable. It's the USB version that can read up to the Mk4 Golf paltform. It can't do Mk5, Touran, etc. Located in Leamington Spa.
I have the the full licensed version with VAS5051 adaptor (2x2) for older K line vehicles pre 95 plus later J1962 connector for later K-line and EOBD (CAN) vehicles. Located in West London.
This was tooked away in the engine section Lost for good??? might need updating I have full Professonal lead, inc Can Bus inc 2x2pin adaptor Covers everything from mk3 right up to 2011 car vehicles, Based on the Wirral
I have a V-checker Pro. It`s an emulation of the old VAG1552 diagnostic reader, but will read everything VAG that has an ODB port (including all current models). Doesn`t do 2x2 though. Apparently can be used to read blocks and alter stuff as per VAGCOM, but I haven`t worked it out yet! But it`s perfect if you just need codes read/cleared. Based in South Manchester
I have VCDS full version i also have a clone 805.2 version that covers newer platform mk5, touran etc. and vag tacho. Can do miles to empty, dash light changes on the mk4. Cluster swops. South London, East london, Kent, Essex/Herts Borders
I have full licensed VCDS with 2x2 lead aswell and all software for dash changes/ecu changes and mileage correction. I'm in TRURO CORNWALL
If you have a pre 2000 car then I have a copy of vagcom that will work with your car...I live in Alton GU34 and work in Guildford GU1 PM me if you require assistance