The Dubbers "Ideal" tool box

Discussion in 'Tools, Equipment & Fasteners' started by turbotommy, Oct 12, 2010.

  1. A.N. Other Banned after significant club disruption Dec 5th 2

    Joined:
    Oct 23, 2003
    Likes Received:
    447
    What would be useful is knowing which cars require more Torx & splines.

    I can get away on Mk1s with an M8 spline, that's it.

    Mk2 needs an M10 spline, no Torxes AFAIK.

    Mk3? etc.
     
  2. paultownsend Forum Member

    Joined:
    Jun 23, 2006
    Likes Received:
    0
    has anyone mentioned a torque wrench yet?
    i found 2 were needeed. one for the smaller stuff, and another for the head etc.

    i found halfords professional tools fantastic value for money. their 100pc kit is hard to beat. its all lifetime guaranteed, and they never quibble with a replacement
     
  3. rubjonny

    rubjonny Administrator Staff Member Admin

    Joined:
    Oct 31, 2003
    Likes Received:
    3,298
    Location:
    Bracknell
    Only bolts I use a torque wrench on are clutch and head bolts, everything else I use common sense :)
     
  4. Funky Diver Forum Member

    Joined:
    Mar 10, 2010
    Likes Received:
    1
    Location:
    Darlington, UK
    Including the ratchet mechanism?

    They refused to change the last one I knackered, then tried to sell me a repair kit [xx(]
     
  5. WillG

    WillG Forum Member

    Joined:
    Mar 18, 2007
    Likes Received:
    80
    ball joint splitter? (scissor type for me!)

    long m8 spline for driveshafts? (or lots of extensions!)

    wire brushes

    wd40/penetrating fluid

    3rd hand!

    decent jack and axle stands

    6ft length of scaffolding/aluminium pipe

    long small magnet for picking things from where they shoudn't be!

    engine crane/winch

    pipe wrench/mole grips for water hose clamps

    maybe more for reassembly:

    copper slip

    electric tester light/multimeter
     
  6. fishnchipsx2 Forum Member

    Joined:
    Jun 8, 2009
    Likes Received:
    0
    Location:
    Bournemouth/Leeds
    Proper coolant hose spring-clip remover.

    [​IMG]

    Best thing I ever bought, saves hours of stress :lol:
     
  7. nealey Forum Junkie

    Joined:
    Jul 1, 2006
    Likes Received:
    34
    small, medium and large pry bar!

    snips

    Large grips
     
  8. ambrose89

    ambrose89 Forum Member

    Joined:
    Mar 19, 2007
    Likes Received:
    21
    Location:
    on back,crap in eyes, beneath car
    bit of wood
    blow torch
    alcohol
     
  9. tones61

    tones61 Forum Member

    Joined:
    Dec 27, 2007
    Likes Received:
    12
    Location:
    ~ MOT TESTING ~ plymouth
    the lug tool for taking of top mounts,:-)
     
  10. Jaundice

    Jaundice Forum Member

    Joined:
    Sep 11, 2007
    Likes Received:
    0
    Location:
    at home
    Needed a 12 sided spline tool for some MK4 driveshaft bolts yesterday, can't remember the size though, I will check and edit later

    Needed an M8 6 sided spline and a lump hammer to get rear caliper carriers off a MK3 after I rounded the hex shape out completely. Although that was before I bought some Irwin bolt grippers:lol:
     
    Last edited: Oct 17, 2010
  11. IanH Forum Member

    Joined:
    Nov 2, 2009
    Likes Received:
    0
    20 Malboro Lights? ;)

    Ian...
     
  12. lufbramatt Forum Member

    Joined:
    Mar 5, 2007
    Likes Received:
    19
    Location:
    Rochester, Kent
    forgot the essential tool for removing donor engines in a hurry, a fork lift truck:

    [​IMG]

    remember that dave? hehe
     
  13. tinydubs

    tinydubs Forum Member

    Joined:
    Sep 4, 2008
    Likes Received:
    0
    Zippo lighter for lighting said blow torch and for heat shrink tubing.
    Spray anti septic, Super glue and spray plaster and duck tape for a quick "combat first aid"fix
    [xx(]
     
    Last edited: Oct 18, 2010
  14. nhoj62

    nhoj62 Forum Member

    Joined:
    Nov 17, 2009
    Likes Received:
    3
    Location:
    nailsea
    1/2" drive breaker bars in 18" 24" and 32" lengths, socket sets in 3/8" and 1/2" all sizes from 8mm to 30mm, torx, allen and spline bits in as many sizes as you can get, also a screwfix utility bar and claw hammer, lump hammer and bolster chisel is good for various jobs, laser tools strut top nuts for them dam pesky top nuts when doing the front suspension, angle grinder for when that dam bolt just wont come out and you have totally run out of patience and swear words. power drill with a variety of wire wheels, for cleaning up the lastest scabby part you got from the breakers. circlip pliers internal and external versions for use on the drive shafts cv joints etc.
     
  15. turbotommy Forum Member

    Joined:
    Sep 5, 2006
    Likes Received:
    14
    Location:
    Newcastle upon tyne
    Lol! certainly do matt :lol: (your forgetting the Sthil saw for the steering column incident pmsl)

    Yes Ian,20 Marlboro lights are an invaluble addition to all tool kits (emergency "break glass" packet hehehehe)

    Some cracking additions peeps :thumbup: will update when beer weres off [:$]
     
    Last edited: Oct 24, 2010
  16. Drew21 Forum Member

    Joined:
    Oct 22, 2003
    Likes Received:
    0
    Location:
    London
    decent spanners (spend cash on these, or get someone rich to buy them for you for your birthday!!)
    timing light, with a timing advance feature
    CO meter for setting the fueling
    washing up bowl & funnels
    oil filter tool (mine is the chain type)
    ramps (and ramp extensions if you're very low)
    jumper leads for testing electrical bits n bobs
    lots of blocks of wood of various sizes
    WD40, plusgas, waxoyl, underseal, black hammerite, copper grease
    pressure brake bleeder (easy DIY to build a one of these)
    battery charger

    may be a luxury is multiple socket sets. I have a 1/4" set (for small beer), a 3/8" set (for pretty much everything), and 1/2" for wheel bolts, cyl head bolts, suspension parts, etc. Universal joints and wobble extensions on all of these. My small torque wrench is 3/8" and I have a large torque wrench which is 1/2". I tend to use a torque wrench for everything as I'm a little bit OCD [:$]

    I've always used a large G-clamp instead of a dedicated caliper wind back tool
    and I use a suitably sized allen key instead of a timing belt tensioner tool (levered over the socket on the tensioner bolt)
    oh and for holding the water pump sprocket still whilst undoing the bolts I have a large one-handed adjustable spanner. Adjustable spanners are quite useful anyway, in true Goldilocks fashion I have three and used the middle one yesterday to undo a coolant sensor!!

    has anyone mentioned screwdrivers yet?
     
  17. bens_cab Forum Junkie

    Joined:
    Dec 30, 2005
    Likes Received:
    0
    Location:
    Ashford kent
    biggest hammer i have works most issues out
     
  18. welshwizzard88

    welshwizzard88 Forum Member

    Joined:
    Aug 15, 2010
    Likes Received:
    3
    Location:
    Devizes
    IM sure it must be there but havent seen it:

    Taps
    Retaps
    Stud extractor for the manifold bolts that just snapp!!

    Some dies to clean up old bols if going to be reused.

    Electricians Teflon cutting grease for threads.
     
  19. Jackwootton New Member

    Joined:
    Dec 28, 2014
    Likes Received:
    2
    Location:
    Ashover
    Rubber Mallet is always good for delicate jobs where you don't want to wreck things.

    I usually just use a forklift, sledgehammer, gas axe and bolt croppers though...
     
  20. Sirguydo

    Sirguydo Fastest milkman in the West Paid Member

    Joined:
    Nov 7, 2012
    Likes Received:
    1,203
    Location:
    Bolton
    My twin brother lol
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice