Hi all I know this subject has been covered many times and the excellent sticky by gti_kev explains how to do a pressure test and WUR mod, but has anyone managed to find out what items are required to build your own pressure tester. I saw a thread recently where someone built there own but he could not remember the parts that were supplied to him by pirtek The only pressure testers i can find for the k-jetronic are 75+ and considering i am only going to use it once i would rather build my own (tight i know) I know a ball valve stop tap and various other fittings are required but what sizes and quantities etc ? Help would be appreciated thanks
Nige the diy guru built one and shows how it's done early on in his epic build thread I bought a cheap test kit off eBay and a additional ball tap from tool station
Sizes What size threads are required for the ball tapp ? do you need a female/female one, male/female ???
Derek here might be able to help. http://www.autostadt.ie/phpbb3/viewtopic.php?f=117&t=18187 He's registered on CGTI too, but doesn't post much
I cobbled one together with a pressure gauge, an old WUR feed hose, some PTFE tape and jubilee clips, probably not H&S approved but it worked
Here is the list of what is needed all, good luck finding the bits in the UK,i think it is going to work out more cost effective to buy a kit off the shelf ! 1 4089K61 1 Each Multipurpose Gauge Plastic Case, 2" Dial, 1/4 Npt Bottom, 0-100 Psi 2 4464K48 1 Each Type 304 Stainless Stl Threaded Pipe Fitting 1/4 Pipe Size, Tee, 150 Psi 3 5779K109 2 Each Nylon And Nickel-plated Brass Tube Fitting Adapter For 1/4" Tube Od X 1/4" Npt Male Pipe 4 5269K311 1 Each Steel Compression Tube Fitting Straight Adapter For 6mm Tube Od X 1/8 Npt Male 5 5779K129 1 Each Nylon And Nickel-plated Brass Tube Fitting Adapter For 1/4" Tube Od X 1/8" Npt Female Pipe 6 8359K14 1 Each High-strength Clear Nylon Tubing .190" Id, 1/4" Od, .030" Wall Thickness, 25 Ft. Length 7 4912K72 1 Each Miniature Chrome-plated Brass Ball Valve Wedge Handle, 1/4" Npt Female X Male Connections Part numbers ref McMaster-Carr USA.