2.0 16V POWER INCREASE GERMAN PLEASE

Discussion in '16-valve' started by Matas, Feb 6, 2020.

  1. Matas Forum Member

    Joined:
    Nov 2, 2019
    Likes Received:
    1
  2. Toyotec

    Toyotec CGTI Committee - Happy helper at large Admin

    Joined:
    Jul 26, 2006
    Likes Received:
    3,321
    Location:
    Creating Pfredstarke
    Information on the engine is sparse.
    He replaced the rear timing chain and all 16 lifters. Did a timing belt change and that was it.
     
  3. Matas Forum Member

    Joined:
    Nov 2, 2019
    Likes Received:
    1
    Damn, 141kw and no info :(((((((((((
     
  4. Toyotec

    Toyotec CGTI Committee - Happy helper at large Admin

    Joined:
    Jul 26, 2006
    Likes Received:
    3,321
    Location:
    Creating Pfredstarke
    Yup.
    It looks like a stock car that he is trying to sell.
    It might have a chip in it, it might not.
    Personally I would not touch it.
     
  5. Matas Forum Member

    Joined:
    Nov 2, 2019
    Likes Received:
    1
    I have same car, but my 110kw engine is not at its 110kw at the moment, 0-100 was 10.6 seconds where it should be around 8 and i have no idea what to do
     
  6. Toyotec

    Toyotec CGTI Committee - Happy helper at large Admin

    Joined:
    Jul 26, 2006
    Likes Received:
    3,321
    Location:
    Creating Pfredstarke
    Because it might want servicing.

    If you look on there, there are several dyno tests we have done , where we established a stock ABF on digifant 3.x achieves ~ 109 to 115 kW @ 6000 rpm.
     
  7. Matas Forum Member

    Joined:
    Nov 2, 2019
    Likes Received:
    1
    Here are results after dyno
     

    Attached Files:

    erreesse likes this.
  8. Toyotec

    Toyotec CGTI Committee - Happy helper at large Admin

    Joined:
    Jul 26, 2006
    Likes Received:
    3,321
    Location:
    Creating Pfredstarke
    Looks typical for the plots, although at a 7000+ rpm limit, do you have a chip fitted?
     
  9. Matas Forum Member

    Joined:
    Nov 2, 2019
    Likes Received:
    1
    What do you mean by saying looks typical for the plots? And i have no idea, i havent touched computer since i bought the car, i changed some parts that should have helped and checked for fault codes many times
     
  10. 2swe Forum Member

    Joined:
    Oct 25, 2019
    Likes Received:
    53
    Location:
    Czech Republic
    That german guy writes something about exhaust header (no further details) with oem cat, batsruck group A exhaust (63mm OD) and K&N air filter, no other engine mods..
     
  11. Matas Forum Member

    Joined:
    Nov 2, 2019
    Likes Received:
    1
    Im thinking about removing my cat, maybe it is clogged up
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice