Door speaker fixings

Discussion in 'Mk2' started by Mk2Singh, Jun 24, 2020.

  1. Mk2Singh Forum Member

    Joined:
    Feb 8, 2011
    Likes Received:
    10
    Hi

    Can anyone help with the part number for these nuts that hold the speaker to the grilles for the door pockets (attached photo)

    Also, anyone have a genuine dash speaker laying around they could draw around, scan and send me so I can make some templates/adaptors to fit some tweeters?

    Thanks :)
     

    Attached Files:

  2. rubjonny

    rubjonny Administrator Staff Member Admin

    Joined:
    Oct 31, 2003
    Likes Received:
    3,298
    Location:
    Bracknell
    N 0386011 -> N 0386015 - 25p+VAT
     
    Mk2Singh likes this.
  3. Mk2Singh Forum Member

    Joined:
    Feb 8, 2011
    Likes Received:
    10
    Thanks! Are these still available from VW then?


    If anyone can help with the dash speaker template that would be appreciated. Thanks :)
     
  4. Savagesam

    Savagesam Moderator Staff Member Moderator

    Joined:
    Nov 24, 2012
    Likes Received:
    1,096
    Do you just want a cut out of the dash hole? So if I were to trace that?
     

    Attached Files:

  5. rubjonny

    rubjonny Administrator Staff Member Admin

    Joined:
    Oct 31, 2003
    Likes Received:
    3,298
    Location:
    Bracknell
    yes those are VW part numbers, sort of thing some hoarder might send you for free though :lol:
     
  6. Mk2Singh Forum Member

    Joined:
    Feb 8, 2011
    Likes Received:
    10
    That could work, I would need the points for the screws too (one on the riveted bracket and the slot on the opposite side) so I can make the mounting tabs on the adaptor. Thank you :)
     
  7. Mk2Singh Forum Member

    Joined:
    Feb 8, 2011
    Likes Received:
    10
    Do you have a hoard of them by any chance John lol? If you also have the rubber spacers that go between them and the speaker/grille that would be a bonus [:D]
     
  8. Savagesam

    Savagesam Moderator Staff Member Moderator

    Joined:
    Nov 24, 2012
    Likes Received:
    1,096
    I'll have a go later on!
     
    Mk2Singh likes this.
  9. rubjonny

    rubjonny Administrator Staff Member Admin

    Joined:
    Oct 31, 2003
    Likes Received:
    3,298
    Location:
    Bracknell
    Dont think I do actually, maybe try Brendon Moss on Facebook?
     
    Mk2Singh likes this.
  10. Bl4ckGryph0n New Member

    Joined:
    Apr 9, 2019
    Likes Received:
    8
    I've made a template for my attempt to install the 1.25" tweeter there. I'll upload it tomorrow.

    In return does anyone know what screws fit in the rivet bracket and in the other clip that slots over. I've tried my collection of screws and nothing seems to fit those. And it's a bit awkward bringing the dash to Screwfix or B&Q :)
     
  11. Mk2Singh Forum Member

    Joined:
    Feb 8, 2011
    Likes Received:
    10
    That would be great if you can upload it. Thanks :)
    I think you could use a self tapper for the rivet bracket?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice