ABF bottom crankshaft pulley

Discussion in '16-valve' started by Splash, Jun 16, 2023.

  1. Splash New Member

    Can't seem to find an ABF bottom crankshaft pulley anywhere, new or used (part number 037 105 243 B).
    Does anyone know of a company that can make them - or know of another VW model that will fit (even with machining)?
    Car is a 1994 mk3 Golf GTI 16v.
    Thanks
     
  2. watercooled Forum Member

    They must be around new as they fail with time and heat from the engine ,the rubber in the dampener splits and the outer spins as I found on my 92 Mk3, end result is the timing mark moves ,makes it rather difficult when you fit a new timing belt to say the least.
    They don't all do this strangely enough the used one I fitted came off the same model car, because of that you my find a good used one ,good luck.
     
  3. Splash New Member

    Thanks Watercooled. I'm finding it very difficult to locate one - new or used - other than a solid aluminium one without the damper, which people have told me to avoid.
     
  4. watercooled Forum Member

    I've only seen these on 2 litre motors so there must be a good reason for them as VW never fitted parts you don't need ,good luck finding one,you may have to import one from the US ,they used the 9a motor version but it should be the same ,have you tried E-bay USA ? .
     
  5. Splash New Member

    Yeah, I've tried Ebay USA. Thanks
     
  6. watercooled Forum Member

    Yes I had a quick look.....no luck myself.
    Presuming the KR one is differant ?
     
    Splash likes this.
  7. Zender Z20

    Zender Z20 Paid Member Paid Member

    Splash likes this.
  8. Splash New Member

    Watercooled: I'm not sure if KR pulley is different to ABF. Does anyone know?

    Zender z20: I'm not sure myself, but I'll have a word with a mechanic who will know - although it looks pretty pricey compared to most pulleys. Thanks
     
  9. rubjonny

    rubjonny Administrator Staff Member Admin

    KR uses V belt rather than ribbed, it would fit the ABF and work if you used the rest of the KR pas/alt stuff along with it though
     
    Splash likes this.
  10. Toyotec

    Toyotec CGTI Committee - Happy helper at large Admin

    You were advised to avoid due to the lack of dampening for second order harmonics on the crankshaft.
    Some of us on here are also on FB.

    I suggest take the part number 037 105 243 B and widen your search to the Passat 35 models, Ibiza and Toledo.
    Also look at german and polish ebay sites for VW/ABF Kurbelwellenriemenscheibe


    The damper is bespoke to the the Seat 1.8 ADL 16v and ABF only.

    Good luck finding one.
     
    Splash likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice