Didn’t get as far as I had planned today. But made a start, v band tacked on and first pipe in place. Then onto part 2, Then onto part 3, I can’t get it in so I’m going to have too put a band in as it straights up. some welding, it’s good enough. It’s not nice to weld.
It’ll get wrapped. Although, it is only temporary. I don’t know why I bothered with stainless and V bands! It’ll get a proper purged and tig’d exhaust when it’s finished
Ooh that looks tasty. Did take the steering rack apart to have it powder coated or did you just paint it?
I rebuilt the rack and painted it but being the muppet I am, I painted it once I rebuilt it, would not recommend.
Great stuff mate! After remaking my exhaust, I realised after that you can buy stainless mig wire! I made an exhaust up for my e36 using the stainless wire and its brilliant! wish id known before!
So true. I thought I had a plan to when I started. And that went right out the window. Least this keeps us sain at the mo. Where did you get the bushes from seen a few makes not sure what ones
Which bushes? Everything is lemforder apart from the ARB drop links, and then powerflex heritage range for the rear arms, and yellow for the pointless bush on the rear beam