Eliptically Grooved Brembo Disks in 280mm available We've had the opportunity to get back into the machine shop again and run off a few sets of 280mm 4x100 Ibiza Cupra Brembo disks with ATE style eliptical grooves. Priced per pair they are 125+vat Combine these with Ferodo DS2500 pads 73+vat and high temp brake fluid 11.49/500ml+vat and you get a brake setup which can withstand this kind of track abuse>> {picture courtesy of Daz @ Oulton Park} Rears also available for Ibiza Cupra MK3 and Lupo GTi rear to same design - 72+vat/pair Grooves are machined with radius cutter within the disk surface not breaking out of the surface so no stres raisers from machining, and are machined to 1mm depth so act as wear indicators also. regards bill
Im looking to improve my brakes on my rallye. Currently have wilwood 4 pots with DS2500 pads which i am happy with but I think the disks are pretty rubbish. I am looking to increase the size of disks and can space the caliper accordingly. Which make disk would you recommend and how much to have them supplied? Currently 280mm but looking to go to 310mm as i have 16" comps so know there is room