Howdy folks, Hope someone can help, I am in the process of putting an AGU 20V into my MK2 1990. I have an 02A DPA gearbox which seems to have 108 mm input shafts. Can I remove the input shafts from my 020 gearbox and place them into the 02A box? Or are there other 02A boxes which have the 100mm shafts as standard. I'm trying to keep costs down as I've just been recovering from Cancer. I bought the car in 2015 and due to bad health I've left her standing. I'm desperate to get the engine in ASAP. Are there any other 02A or 02J gearboxes which will have 100mm input shafts as standard that will connect up. The inside of the shaft is stamped - 02A 355 G Thanks Muller