Hi, The specifications and options for the RA 8j x 16" wheels are: 1. The RA's are manufactured in the UK from LM9 specification Aluminium alloy to ISO9001 standards. 2. The RA's are available to order with an offset range from ET15 through to and including ET43, staggered offsets front and rear are available as a no cost option. 3. The Standard colour options for the RA 8x16 wheels are... Silver, Anthracite Grey, Black or White. 4. The cost option colour for the RA 8x16 wheels is Gold, this colour is available to order at an extra cost of 7.50 per wheel inclusive of VAT. 5. The RA's can be supplied in a plain primered/undercoated but unpainted finish to allow you to have them colour coded to your car, this is a no cost option. 6. The RA 8x16 wheels can be supplied with a diamond cut/polished front rim section as a cost option of 10.00 per wheel inclusive of VAT. This option can be supplied with either a lacquer/clear coat over the diamond cut area, or without. 7. The Ra 8x16 wheels will be supplied with pressed in steel bolt seating 60 degree tapered inserts to ensure a good fit and wheel longevity. 60 degree tapered wheel bolts can be supplied if required. The price for a set of 4 wheels is 675 inclusive of VAT plus any selected finishing cost options. If I can help, or if you have any further questons then please do not hesitate to ask. Best regards Chris B-Star Wheels
Thank you for the kind words, over the next few weeks (time permitting) we will be starting a cool thread showing the engineering work that goes in behind the scenes to produce our low pressure cast aluminium wheels.
Would there be scope to produce an 8x16in version of the Corrado VR6 5 spoke speedline wheel? http://www.use.com/images/s_2/VW_Corrado_VR6_Speedline_Alloys_05d632a253b1ed8060bd_1.jpg
