Corrado 3.2 v6

Couple years ago I both Corrado and I started to collect parts, my first idea was to put 1.8t inside.
I, both Audi A3 with AGU engine, both bigger turbo from Mercedes A45 AMG, IE performance rods, and start to build...







We made exhaust manifold for new turbo

 

At one point I had some issues with car papers, so I both another shell

 

"New" shell is in pretty good condition

 

We got rid of old isolation

 

For front brakes we used TT RS calipers with 330mm discs



Inside AZEV A 17-inch rims





We need adapters for calipers, so I made one

 

We put it on the car to see how it fits

 

At this point I decided to put another engine in the car, so we pull out 1.8T and start making changes for 3.2 V6 FSI from Passat B6 and gearbox from Bora V6.

We had to use MK3 front beam, MK3 VR6 engine mount and custom made gearbox and front mount.









gearbox mount

 

front mount









we put MK4 TDI/GTI heater exchanger, so we needed new brackets

 

Then it was time for wiring

engine wiring







new fuse and relay "box"

 

ECU mount







car wiring

 

Some wire hiding









And these are the last pictures from a couple of weeks ago, I hope we will continue to work soon.

I hope you like it so far?

 

That's a serious amount of work! Well done.

 

great work my friend!