Hi guys, I’ve been working on my project for a some time now and now it time to get the wiring done. I’ve read many thread on ce2 fuse boxes and wiring 1.8t to mk3, but seems that many of the wiring harnesses used on this website don’t match mine. I seem to have many more wires come out the coloured plugs from the engine harness to the fuse box. I have a aum 1.8t 150bhp from a 2000 golf gti mk4 donor car. White - 6 wires orange -8 wires brown - 6 wires Blue - accelerator pedal wires black - 2 wires Tomorrow I will get the right wire colours coming out if each pin I just wanted to find out how I’m going to wire this engine roughly so I can get the engine to start I have kept the other side of the plugs as well I’ve only snipped them from the other end so I can join the wires without worrying about plugs I just want help figuring out what wire is what and how I’m going to connect them to the ce2 fuse box with fuses to start car Thanks for your time.
this thread? https://clubgti.com/forums/index.ph...install-faq-now-with-added-dieselness.267196/ dont worry too much about the wire colours, these can differ. concentrate on pin positions