The VAG-COM / VCDS owner directory thread.

Discussion in 'Vagcom / VCDS' started by Trev16v, Jun 19, 2011.

  1. Trev16v

    Trev16v Paid Member Paid Member

    Joined:
    Oct 22, 2003
    Likes Received:
    450
    Location:
    Oxfordshireland
    Having seen something similar on the Corrado forum that I browse quite a bit, I thought it's worth creating a thread of all the people who have VAG-COM (or now known as VCDS) who are happy for help someone read fault codes and whatever out of their car.

    So I'll start.

    I have VCDS-Lite, fully functional with a paid licence. I don't *yet* have a commercially-bought lead (I will get one), but I have built my own interface and successfully used it to talk to our Corrado 16V's KE-Jet ECU which I know few seem to have success doing.

    I'm near Wantage, Oxfordshire.
     
  2. shaz8389

    shaz8389 Forum Junkie

    Joined:
    Feb 26, 2009
    Likes Received:
    9
    I have VAG-COM and are in ze West London area.

    Getting a new laptop screen within the week so I'll be fully functional to help out if anyone needs it.
     
  3. sparrow Paid Member Paid Member

    Joined:
    Jan 2, 2006
    Likes Received:
    738
    Location:
    Leamington Spa
    I have a full VAG-COM cable. It's the USB version that can read up to the Mk4 Golf paltform. It can't do Mk5, Touran, etc.
    Located in Leamington Spa.
     
  4. Toyotec

    Toyotec CGTI Committee - Happy helper at large Admin

    Joined:
    Jul 26, 2006
    Likes Received:
    2,948
    Location:
    Creating Pfredstarke
    I have the the full licensed version with VAS5051 adaptor (2x2) for older K line vehicles pre 95 plus later J1962 connector for later K-line and EOBD (CAN) vehicles.
    Located in West London.
     
  5. Trev16v

    Trev16v Paid Member Paid Member

    Joined:
    Oct 22, 2003
    Likes Received:
    450
    Location:
    Oxfordshireland
    Le bump.
     
  6. Crispy 8V CGTI Committee - Club Secretary Admin

    Joined:
    Oct 23, 2003
    Likes Received:
    115
    Location:
    NW
    This was tooked away in the engine section

    Lost for good??? :lol: might need updating

    I have full Professonal lead, inc Can Bus inc 2x2pin adaptor
    Covers everything from mk3 right up to 2011 car vehicles,

    Based on the Wirral
     
  7. MUSHY 16V

    MUSHY 16V Moderator Moderator

    Joined:
    Jan 26, 2008
    Likes Received:
    788
    Location:
    aberdeen
    i have VCDS 10.6 with a vag 106 cloned lead and vag tacho 3.01
     
  8. StuMc

    StuMc Moderator and Regional Host - Manchester Moderator

    Joined:
    Nov 12, 2004
    Likes Received:
    266
    Location:
    50? 20` 47 N - 06? 57` 57 E
    I have a V-checker Pro. It`s an emulation of the old VAG1552 diagnostic reader, but will read everything VAG that has an ODB port (including all current models). Doesn`t do 2x2 though.

    Apparently can be used to read blocks and alter stuff as per VAGCOM, but I haven`t worked it out yet! But it`s perfect if you just need codes read/cleared.

    Based in South Manchester
     
  9. rubjonny

    rubjonny Administrator Admin

    Joined:
    Oct 31, 2003
    Likes Received:
    1,457
    Location:
    Bracknell
    I have vag-com and vag-tacho, location is bracknell/berkshire
     
  10. m1keh Forum Member

    Joined:
    Jul 16, 2009
    Likes Received:
    56
    Full version of VCDS lite and cheapy ebay lead. Devon until September then Leamington Spa.
     
  11. tshirt2k

    tshirt2k Forum Junkie

    Joined:
    Oct 21, 2004
    Likes Received:
    325
    Location:
    Herts
    I have VCDS full version i also have a clone 805.2 version that covers newer platform mk5, touran etc. and vag tacho. Can do miles to empty, dash light changes on the mk4. Cluster swops.
    South London, East london, Kent, Essex/Herts Borders
     
  12. Admin Guest

    yeah don't PM to update it though. put it to the powers that be:thumbup:
     
  13. iwanaturbo New Member

    Joined:
    Dec 3, 2010
    Likes Received:
    0
    I have full licensed VCDS with 2x2 lead aswell and all software for dash changes/ecu changes and mileage correction.

    I'm in TRURO CORNWALL
     
  14. Dan W

    Dan W CGTI Regional Host

    Joined:
    Jan 21, 2009
    Likes Received:
    113
    Location:
    Penryn, Cornwall
    I have access to vagcom, although I'm very close iwanaturbo above.

    Penryn, Cornwall
     
  15. rich81 Forum Member

    Joined:
    Oct 6, 2009
    Likes Received:
    0
    Location:
    Winnersh, Wokingham
    I have Vag-com and vag-tacho. Happy to help out members for free no problem. In Reading.
     
  16. Matt82

    Matt82 Forum Addict

    Joined:
    Apr 26, 2006
    Likes Received:
    8
    Location:
    GTI Scene
    Essex
     
  17. LregG

    LregG Paid Member Paid Member

    Joined:
    Jun 15, 2004
    Likes Received:
    16
    Location:
    United Kingdom
    If you have a pre 2000 car then I have a copy of vagcom that will work with your car...I live in Alton GU34 and work in Guildford GU1

    PM me if you require assistance
     
  18. modded a3 New Member

    Joined:
    Feb 8, 2012
    Likes Received:
    0
    .
     
    Last edited: Feb 29, 2012
  19. Collie Forum Junkie

    Joined:
    Nov 20, 2003
    Likes Received:
    66
    Location:
    Adlington Lancs
    checked the 3 fuses on the battery? how did you assertain that a new ecu was required?
     
  20. modded a3 New Member

    Joined:
    Feb 8, 2012
    Likes Received:
    0
    .
     
    Last edited: Feb 29, 2012

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice