Rear axle, back plate to back plate dimensions

Its 1376mm jonny,its stripped down now so i'll double check.

 

More:

http://www.clubgti.com/forum/showthread.php?t=86690

 

Passat 1Z TDI 4-stud with drums, '95 model - 1344mm

- the car I expected to be wider, isn't

Managed to measure this from underneath with no probs, so should be an easy measurement for anyone else.

 

Interesting that is the same width as the 1Z engine toledo,is the front wide track or not? (toledo is not)
Also measured 2 x 5 stud mk3 golf GTI axles, 1 with ABS & 1 without, both came in at 1358mm.

 

Before I lose this pic again, 1990 spec Mk2 axle with outer strentheners on the trailing section from here

 

my mk2 axle is like that, but has the internal arb, reference checks out as golf mk2 gti G60 or Corrado G60 (same axle)
1340mm I'm afraid

 

Hi, new to this forum, was directed to this thread by members of Ed38 and Autostadt.ie. I have a '94 CL. Can someone tell me it's exact length and what's the narrowest mk2 beam I can fit in it's place?

 

Has anyone posted the dims for the Mk1 beam? I've been searching but can't find anything maybe I'm missing it, idk.
I can measure mine tomorrow but I'm not sure if it's actually straight or not.

 

Ok, I measured the beam on my Mk1 and it's about 129.6cm. Is this ok, is this bent , I don't know , anyone?

 

The table is being fixed in post 1.

From one of my notes offline, that's a straight axle

 

Table fixed

 

Thank you.
I'm amazed it's still straight after 35 years

 

Measured a Corrado g60 J reg, 4x100 1344

 

Passat b4 tdi 1996 1341mm disc brake. Axle stub has 6 bolts.