16v turbo help!

ok basically i am gathering parts to convert my mk2 kr to turbo.so far i've got:
-g60 ecu
-pb wiring
-t3 turbo externally gated a/r 48
-38mm externall set at 0,6 bar
-hks blow off
-side mound intercooler
-g60 injectors
abf head gasket
-20vt fuel rail

my car used to be a pb so the wiring should be straight forward.the engine is in prety good condition but its gonna get a rebuild.i will be using std internals and im aiming at about 180-200 bhp.what will i be needing else?

 

ABF head gasket x 2 ! should that read ?

2 X Steel Head Gaskets , think they are actually TDI Gaskets

 

by using 2 head gaskets do u know the cc ratio im gonna get?

 

Would you also need a 1.8t Inlet manifold and throttle body?

 

I have a custom AGU 20v/16v inlet manifold as a spare.

Pm me if interested

 

20vt inlet mated to a 16v bottom half (not mine - tshirtuk's)

use an ABF throttle body.