ATS DTC alloy wheels anyone got any

they look a million times better than the ebay pics!! I so very nearly got some of these and then didn't as the ebay pic looked pants I wish I had now!

does anyone know what offsets they come in? as looking at that pick they are spot on for the track wheels on the mk1

 

Think mine are ET35, they stick out of the std metal arches (i dont have any plastics) about 5-10mm on the front.

Offset is just about right IMO

 

Like my forehead you mean?

 

like my ****

 

.

 

im now looking to get a set of these over winter, wheres easist to get them from? as they ahve all gone from ebay......I have emailed ATS direct but I suspect i will prob be told to speak to wolfrace uk.

also dubnutta did you get the 7x15s or the 8x15s? Im looking at 7x15s in a low ET hopefully around et30, as I hope this should give easily enough room between the back of the spokes and the G60 caliers running 16v pads.

cheers

Karl.

 

If you saw the calipers dub nutta has behind the ATCs I think there will be enough room for 280s.

 

might be getting rid of mine. still not 100% decided yet. thinking about going for a full on race set up instead of the comprimised road set up.

 

GVK - I guessed there would be, I just didnt want to get caught out like I have before with the face of the caliper touching the back of the spokes and the wheels not going on

Pol - If you do sell drop me a PM,

also who was the seller on ebay? as I have emailed wolfrace direct and they want, and I quote "The wheels are around 105 per wheel." that seems a hell of alot more than the ebay price!!!

 

....they're going up 10mm in diamater over christmas as well!

 

i just got a set off ebay 112
7x15 70555
for use at the ring & track days

 

bargin

 

okay i can source the 7x15 however i wanna get the 8x15, where shall i try? any suggestions??

 

nice m3 at oulton running ats dtc rims

 

That looks

So what sizes do they come in?

7x15" and 8x15"...???

 

yup, various ET's also, got a price of 85 notes for 8x15 (vat not included) with 30 shipping for 4 from ATT.

Did you get my pm ali?

 

Anyone got any idea if you would get a 305mm disc & 4pots behind these, in 8x15", offset ET??...

 

Bringing this thread back from the dead, i've just picked up a set of these, in 15x8 et20 spec...

Now my question is, does anyone know the exact center bore of these wheels? I was informed by the former keeper that it's around 60mm, but cannot find spigot rings of that dimension, only 60.1. Is it likely to be this?

Unfortunately i cannot fit my vernier caliper inside the wheel to measure it accurately...

 

Please dont tell me these are off autegmotorsport in the classified section?

I emailed last night but no reply from him.

 

I know! The Auteg ones where on sale before the Ring trip and I tried my upmost best to ring them, email them and PM them. Even left a voice mail and i got no response what so ever.

Gurds