James@BBT's Mk1, 2.0 16v, Throttle Bodies, 285mm Brakes, RS's etc etc...

That is seriously nice...
That idea is stored in my head forever now.. Thankyou!!

 

was undecided whether to put pics up of it or not, but I couldn't resist!

 

Did you use any sealer on these or PTFE tape on the seats? because they WILL leak without it. The rubber O rings aren't touching anything to have an effect and tightening them up wont be enough.

 

They're not in yet, still a way off, looking into getting some "long nose" injectors now, or possibly opening the seats up a bit to get the injectors further into the manifold.

But thanks for the heads up!

 

Can't see that being neccesary. Will need space to atomise around the port wall. You may get fuel firing straight onto the centre and running down .

 

After a year or so of procrastination, I finally got round to getting the tyres fitted on my RS's, and set about fitting them on the car, so after the boring job of fitting a new balljoint on the daily Cordoba (which now appears to have shat its inner CV joint, how nice!) I got on with it...













Rears will get a 10mm spacer, and a bit of camber, as well as losing a good inch or so out the ride height, fronts will get tucked into the arches a bit more once I've done some more "surgery" but yeh, it's coming along...

 

Is this one still on the go?