Mk3 1.4 Engine conversion to 1.8t aum

Discussion in 'Members Gallery' started by 1.8tgti, Jan 7, 2021.

  1. 1.8tgti New Member

    Dec 23, 2020
    Likes Received:
    Hi guys, I’ve been working on my project for a some time now and now it time to get the wiring done.

    I’ve read many thread on ce2 fuse boxes and wiring 1.8t to mk3, but seems that many of the wiring harnesses used on this website don’t match mine. I seem to have many more wires come out the coloured plugs from the engine harness to the fuse box.

    I have a aum 1.8t 150bhp from a 2000 golf gti mk4 donor car.

    White - 6 wires
    orange -8 wires
    brown - 6 wires
    Blue - accelerator pedal wires
    black - 2 wires

    Tomorrow I will get the right wire colours coming out if each pin I just wanted to find out how I’m going to wire this engine roughly so I can get the engine to start

    I have kept the other side of the plugs as well I’ve only snipped them from the other end so I can join the wires without worrying about plugs

    I just want help figuring out what wire is what and how I’m going to connect them to the ce2 fuse box with fuses to start car

    Thanks for your time.
  2. rubjonny

    rubjonny Administrator Staff Member Admin

    Oct 31, 2003
    Likes Received:

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice