What is the max Boost for ko3 std AGU?

What would people say the max boost I should be running on my mk1 (dta) internally the engine is standard...really don't want to blow her up quite yet! Figures in bar please!!

 

my k03 on my old ibiza ran 17psi and that was fine i did know a few boys running them at 24psi

 

my guage seems to read just below 1.4 bar so thats about er 20psi errr

Better order a softer spring for the wastegate actuator then, the one that stealth supplied wont fit the actuator looks like its for a d/v or smnthn

 

the spring will probably b for a external wastegate. your actuator should be good for 1.6bar.

 

it's a forge actuator if that makes a difference

 

softer spring then... 9psi one... you got any means of boost control? like the n75 as std?

 

no they said I could change the spring in the actuator for a softer one then they can start using the n75 again

 

Just called Forge and had a chat to a very helpfull guy there....he's gonna send one to me f.o.c Apparently my spring is too heavy

Fair play to them

 

they have great service

 

i'll definatly use them again, thanks for the help

 

I'm spiking to 19psi then dropping to 15psi at 6,400rpm

 

wats the max boost i could run on a k04 running in a early A4.