If you have a suitable garage (an up and over door will get in the way) then you can use one of these.... http://cgi.ebay.co.uk/1-TON-CHAIN-B...66:2|39:1|72:1689|240:1318|301:1|293:1|294:50 I've changed engines in Mk2 golfs without a hoist though... Just unbolt the front panel, bumper, X-member...
When I took the engine out of my mk2 I took the whole front end off including cross members, supported the engine on axle stands and a jack then roled the car backwards down the drive. When I did the corrado I took the bonnet off and used a crane. Its easy taking the front end off but its much easier using a crane and not taking all that extra stuff apart. I have a crane sitting in the garage that you can borrow pm me.