Megasquirt Conversion Gallery

i Started with Mircrosquirt but then realised i couldn't run AlphaN on it so changed to MS1 V3


The wiring is straight forward now, 2 x 12v feed, 12v switch feed, - Ground, Rev counter feed, boot loader, Fuel pump feed.


External trigger wheel not internal one for Eurospec Crank
All the parts together now for the Crank sensor & Tigger Wheel



MS1 V3 Fitted








Dizzy Blank from Euro Spec 25

i'll be keeping a close eye on this one, as i'm fitting Megasquirt on my project c/w 45 DTH Jenvey's !

and Nige only lives down the road so will be able to help out.

 

Is this the best place to get kits? Do they ship as low value?

I'm looking to buy a kit myself at the moment. Will be watching this thread. Have got a zetec coilpack and was thinking of going wasted spark also.

 

K-Jet is like playing hoopla at the funfair. Megasquirt is the equivalent of walking up to the peg and placing the hoop on it.

 

The ABF has a standard bottem end and cams but with a KR head (not that makes any difference).

I will use the 60-2 oem wheel for now. I hear stories about them breaking loose with high torque/rpm motors though so might look into using the 20vT external wheel if this is a problem with future development.

Gurds

 

3 ABF's

Nige can i call tonite with the laptop and my ECU then you can have a play with the Stimulator board .

 

I liked building and testing mine. just follow instructions its fairly straight forward. You may have to switch between main manual and the ms extra manual when doing ignition bits.

 

*Cough*
4 ABFs.

Mine was done over 3 years ago...and the first one to be done, as far as I know!

Details here:
http://www.basildaham.com/

Go to '16v tuning' then 15 down on the left hand column.

Edit to add details.

 

The megasquirt has been the most testing part for me

But hopefully soon to be sorted

 

Ahem...
7 ABFs on MS

 

Ok. Don't need to go there in mine due to added huff!

 

Pah! This club is getting less exclusive by the day.

I just tried to PM you...and you are full up!
Any chance of you clearing some space?
Just wondered if you'd had a box delivered yet?

 

Make that 8 Plus Steve R's so thats 9 on MS.

 

Leave it out. That cap is a bridge between earth and the filtered VR signal. Not that you would be using this circuitl anyway as you would be on the "OPTIN" circuit so ABF hall sensor users need not worry.
I regularly swap one ECU between different engines hall and vr types, when bebugging issues. You don't want another unwanted unknown in the mix.

 

Correction...That would be 11 .
I forgot to add BenS and eatonMK2 so 5 from me.

 

all these 16v abfs on the squirt lol think theres a few 20vt now eddie lol

 

They are as common as bird poo

 

PM'd

 

Does that use a club with more than 10 members

We'd qualify for a stand at inters with taht many

ClubGTI ABF/MS

 

You as well. Bloody hell we up at 12.