http://www.pistonheads.co.uk/sales/1261226.htm this chappy sold his mk3 16v, apparently with an inlet cam and polished head, with a supposed 197 bhp. the graphs looked a bit familiar so looked at glens (essthrees) tuning thread. his dyno plots are pretty much identical.... same power outputs.... same time of run. what a cheeky *******.... not anyone on here i hope? http://www.clubgti.com/forum/showthread.php?t=186393 "Few things I think are worth mentioning I have managed to contact some previous owner who have shed some light on the modified state of the engine. The car has had a port and polished head and a 268 schrick inlet cam at least. The exhaust cam was left standard as this messed with the idle. He has also sent me a rolling road print out and I can honestly say this car feels every bit of 197bhp." glens dyno pistonheads dyno... they have removed the registration number http://www.pistonheads.co.uk/sales/...&imgsrv=1¤t=7&make=VOLKSWAGEN&model=gti
Proper shady. Reg number and address of the Rolling Road have been edited out. Even the time is the same. LOL!!! Gurds
More from this advertiser: http://www.pistonheads.co.uk/sales/1280172.htm Phone: 07071011147 Name: Hamza Ahmed (hum22a) - matches CGTI username Perhaps hum22a would like to explain himself? http://www.clubgti.com/forum/showthread.php?t=195941
Jesus, you lot are like VW stonemasons or something! I must've missed the "Ears to the ground boys, nothing VAG related escapes CGTi attention" spiel whenI registered on the forum The original advert with the RR printout says the car has now been sold. If it was live this morning, I would hazard a guess that a certain hum22a recieved a grilling from a number of forum users & subsequently tried to close the ad?
It's more the staggering information which can be got off the internet, finely demonstrated. Absolutely, we would.
Good spot. Tracking the seller down doesnt look like it will be a problem, but is there any way the new owner can be found and notified? Anyone here know of someone who has recently picked up a new Mk3 16v? Somehow I doubt the seller is going to come clean.
i recognise the pics, he is definately a poster on here i feel well sorry for the buyer... fooking rip off merchant
essthree should ring him and ask about why hes using his plots bet the little gyppo hangs up in a hurry
19-year old stooodent from Glasgee, according to his profile. Set Frankie Boyle onto him, see how he likes it
Where's Glasgee? Can we just check that Glenn didn't sell him an engine - although I suspect he didn't.
In any case, anyone who believes that spec of engine would genuinely produce close on 200BHP is being set up for a fall IMO
Having just been outside to check...I can confirm that MY engine is still firmly bolted into my Mk3...and still making 140+ ATW. The cheeky sod. Some mug will have bought that car. I can't believe the neck of some people.