budget throttle bodies management

it will run standard bosh sensors as found in many cars including vw-s

I'v just run standard 9a WTS, i bet abf blue temp sensor will be ok as well

Bought ATS from emerald but i think prety much any 2 pin air temp sensor will work

As it goes for TPS i'v used 2 or 3 different makes as they are all much the same, as long as you getting full sweep of 0-5v from fully closed to fully open than it will be fine

 

yeah thats what i thought, pretty much most universal webber and bosch stuff.

great, i have all the sensors still from my old cossy days.

so only think i need to sort is a pin out when you can find a scanner that would be great, then i can make a loom and away we go.

Do the 8P ecu's run map sensors?

 

They have provision to run map sensor and do run them in standard application but you will not need it at all

I will sort that diagram as soon as i get home bud

I still think its better obtaining original loom as that way you get original connector and all wires and connectors you will need, unwrap, chop off what you dont need, extend or shorten what you do need and than wrap again, job done

Good luck with it any way bud

Im thinking of doing another one my self

 

sambo, no worries all thats, great no mad rush.

dont need the original loom, im a motorsport electrician, so thats what i do all day anyway.

 

Exellent!

If you feel like making a spare loom, feel free

 

Here you are bud

 

legend!

 

didnt expect the injectors to fire in group on an OE setup, but no matter.

helps loads, can make a nice loom up from that, will post a pictures once done